Template:Seagate V11/M11 SMART attributes
From Computing Classics Wiki
Revision as of 06:14, 24 September 2024 by TheDragonFire123 (talk | contribs) (4 revisions imported: All kinds of templates for CCW to emulate AEW's old hard drive stock)
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0C/12 | Power Cycle Count |
| 0xB7/183 | SATA Downshift Error Count? |
| 0xB8/184 | End-to-End Error |
| 0xBB/187 | Reported Uncorrectable Errors |
| 0xBC/188 | Command Timeout |
| 0xBD/189 | High Fly Writes |
| 0xBE/190 | Airflow Temperature (Max/Min/Current) |
| 0xBF/191 | G-Sense Error Rate |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC3/195 | Hardware ECC recovered |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xF0/240 | Head Flying Hours |
| 0xF1/241 | Total Host Writes |
| 0xF2/242 | Total Host Reads |
Template documentation (for the above template, sometimes hidden or invisible)
This template is intended for use on Seagate V11, V15, M11 (with 0xFE turned on), M15 (with 0xFE turned on), V15CMRIR and V15Pine hard drive models. For other families, please see the navbox.
TemplateData[edit source]
Displays SMART attributes for Seagate F3 V11 and M11 hard drive models.
| Parameter | Description | Type | Status | |
|---|---|---|---|---|
| Enable 0xFE Free Fall Protection | enable_fe | Set to anything other than blank to enable 0xFE Free Fall Protection, for use on M11 family drives.
| String | optional |