ST3250310AS

ST3250310AS was a hard drive model created by Seagate. It succeeds the previous ST3250820AS part of the same Barracuda 7200.10 family, reducing the number of platters from two to one using 250 GB platters. It is the first Seagate drive model to be based on the then new perpendicular magnetic recording. This model was succeeded by the ST3250318AS, which further reduced the number of heads from two to one. It is the final 250 GB Seagate 3.5" model to not be based on the F3 architecture.

SMART attributes

ID	Name
0x01/1	Read Error Rate
0x03/3	Spin-Up Time
0x04/4	Start/Stop Count
0x05/5	Reallocated Sectors Count
0x07/7	Seek Error Rate
0x08/8	Seek Time Performance
0x09/9	Power-On Hours
0x0A/10	Spin Retry Count
0x0C/12	Power Cycle Count
0xBB/187	Reported Uncorrectable Errors
0xBD/189	High Fly Writes
0xBE/190	Airflow Temperature
0xC0/192	Power-off Retract Count
0xC1/193	Load/Unload Cycle Count
0xC2/194	Temperature (Max/Min/Current)
0xC4/196	Reallocation Event Count
0xC5/197	Current Pending Sector Count
0xC6/198	Uncorrectable Sector Count
0xC7/199	UltraDMA CRC Error Count
0xC8/200	Write Error Rate
0xCA/202	Data Address Mark Error

Trivia

• This hard drive is the final Seagate Barracuda 7200.10 model, and the only one to use 250 GB platters.