TOSHIBA MQ01ABD100M
From Computing Classics Wiki
Revision as of 22:13, 9 February 2024 by TheDragonFire123 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
TOSHIBA MQ01ABD100M is a hard drive model created by Toshiba. It is an updated version of the TOSHIBA MQ01ABD100. While some units support SATA 3.0,[1] some others only support SATA 2.6; this is still an improvement over the original MQ01ABD100, however, as all MQ01ABD100s only support SATA 2.6. This model was discontinued in favour of the original MQ01ABD100.
Similar units from other manufacturers include the WDC WD10JPVT-xxA1YTx or WDC WD10JPVX-xxJC3Tx, depending on whether a unit supports SATA 3.0 or SATA 2.6 only.
SMART attributes[edit | edit source]
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x02/2 | Throughput Performance |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x08/8 | Seek Time Performance |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0C/12 | Power Cycle Count |
| 0xBF/191 | G-Sense Error Rate |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature (Max/Min/Current) |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xDC/220 | Disk Shift |
| 0xDE/222 | Loaded Hours |
| 0xDF/223 | Load/Unload Retry Count |
| 0xE0/224 | Load Friction |
| 0xE2/226 | Load 'In'-time |
| 0xF0/240 | Transfer Error Rate? |
See also[edit | edit source]
References[edit | edit source]
- ↑ linuxhw. "9472829AB09E". HDD/SSD Desktop-Class Reliability Test.