SAMSUNG SP1614C
From Computing Classics Wiki
Revision as of 04:26, 5 February 2024 by TheDragonFire123 (talk | contribs) (Created page with "{{infobox hard drive |image1 = SAMSUNG SP1614C top lid.jpg |caption1 = Top lid of a SAMSUNG SP1614C. |image2 = SAMSUNG SP1614C CrystalDiskInfo SMART printout.png |caption2 = CrystalDiskInfo printout of SMART attributes from a SAMSUNG SP1614C. |manufacturer = Samsung |family = Samsung SpinPoint P80 |platform = Caesar? |form_factor = 3.5" |z-height = 26.1 |speed = 7,200 |capacity = 160 |capacity_unit = gb |cache = 8,192 |cache_unit = kib |af = No |max_transfer = 10...")
SAMSUNG SP1614C was a hard drive model created by Samsung. It was a 160 GB model based on two 80 GB platters, and was the first SATA 160 GB model. It mechanically is identical to the SAMSUNG SP1654N, except it makes use of an onboard PATA to SATA bridge chip to provide the SATA interface. As a result, it cannot support NCQ and only has SATA-150 MB/s transfer rates. This model was succeeded by the SAMSUNG HD160JJ, which uses a native SATA MCU that can support SATA-300 and NCQ.
SMART attributes
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x08/8 | Seek Time Performance |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0B/11 | Recalibration Retries |
| 0x0C/12 | Power Cycle Count |
| 0x0D/13 | Soft Read Error Rate Stab |
| 0xBB/187 | Reported Uncorrectable Errors |
| 0xBC/188 | Command Timeout |
| 0xBE/190 | Airflow Temperature |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xC8/200 | Write Error Rate |
| 0xC9/201 | Soft Read Error Rate |
| 0xCA/202 | Data Address Mark Error |