APPLE HDD HTS541010A9E662
From Computing Classics Wiki
APPLE HDD HTS541010A9E662 was a hard drive model created by HGST and exclusively used by Apple Inc. in various iMac computers. It was a 5,400 RPM 2.5" 9.5 mm model using two 500 GB platters, and was an Apple-exclusive offshoot of the mainstream HGST HTS541010A9E680. Compared to it, however, the HTS541010A9E662 doubles its cache to 16,384 kB, locks the interface to SATA 300 MB/s (despite the model number implying otherwise), and adds a free-fall sensor.
SMART attributes
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x02/2 | Throughput Performance |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x08/8 | Seek Time Performance |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0C/12 | Power Cycle Count |
| 0xA0/160 | Free-fall Sensor Self Test Result |
| 0xBF/191 | G-Sense Error Rate |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC3/195 | Hardware ECC recovered |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xDF/223 | Load/Unload Retry Count |
| 0xFE/254 | Free Fall Protection |