FUJITSU MHW2120BH
From Computing Classics Wiki
Revision as of 01:17, 12 September 2022 by TheDragonFire123 (talk | contribs) (Correct command sete)
FUJITSU MHW2120BH was a hard drive model created by Fujitsu. Part of Fujitsu's long running Hornet series of 2.5" drives, it was a 120 GB PMR hard drive, one of the first PMR models from Fujitsu.
SMART attributes
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x02/2 | Throughput Performance |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count (also tracks remaining spare sectors) |
| 0x07/7 | Seek Error Rate |
| 0x08/8 | Seek Time Performance |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0C/12 | Power Cycle Count |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC3/195 | Hardware ECC Recovered |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xC8/200 | Write Error Rate |
| 0xCB/203 | Run Out Cancel |
| 0xF0/240 | Transfer Error Rate |
Trivia
- The behaviour of Read Error Rate, Seek Error Rate and Write Error Rate is not known, but may be thought to be much like Seagate's, representing number of reads/seeks/writes respectively in addition to or rather than errors.
- Like many Fujitsu drives and unlike almost every other drive model, the top cover is secured only by Phillips screws.
Notes
- ↑ Reports SATA 2.5, but speed of SATA 1.0.