Template:Western Digital SMART attributes: Difference between revisions
From Computing Classics Wiki
Fix typo |
Add disable ramp |
||
| Line 15: | Line 15: | ||
|0xBF = {{#if: {{{enable_0xbf|}}}|G-Sense Error Rate (only available on some OEM models}} | |0xBF = {{#if: {{{enable_0xbf|}}}|G-Sense Error Rate (only available on some OEM models}} | ||
|0x0C = Power Cycle Count | |0x0C = Power Cycle Count | ||
|0xC0 = Power-off Retract Count | |0xC0 = {{#if: {{{disable_ramp|}}}||Power-off Retract Count}} | ||
|0xC1 = Load/Unload Cycle Count | |0xC1 = {{#if: {{{disable_ramp|}}}||Load/Unload Cycle Count}} | ||
|0xC2 = Temperature {{#if: {{{disable_0xc2_for_hp|}}}|(not available on HP OEM models)}} | |0xC2 = Temperature {{#if: {{{disable_0xc2_for_hp|}}}|(not available on HP OEM models)}} | ||
|0xC4 = Reallocation Event Count | |0xC4 = Reallocation Event Count | ||
Revision as of 12:38, 7 September 2022
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0B/11 | Recalibration Retries |
| 0x0C/12 | Power Cycle Count |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xC8/200 | Write Error Rate |
Template documentation (for the above template, sometimes hidden or invisible)