TOSHIBA HDWJ110: Difference between revisions
Created page with "{{infobox hard drive |image1 = TOSHIBA HDWJ110.jpg |caption1 = Top-down view of hard drive. |image2 = Toshiba HDWJ110 SMART printout.png |caption2 = CrystalDiskInfo printout o..." |
No edit summary |
||
| Line 19: | Line 19: | ||
|mttf = 600,000 hours | |mttf = 600,000 hours | ||
|max_load_cycles = 600,000 | |max_load_cycles = 600,000 | ||
|unrecoverable_error_rate = <math>1</math> in <math>10^14</math> | |unrecoverable_error_rate = <math>1</math> in <math>10^(14)</math> | ||
'''TOSHIBA HDWJ110''' is a hard drive model created by [[Toshiba]]. It is notable for being one of the few remaining conventional magnetic recording 1 TB 2.5" drives remaining, the other being the [[WD10JFCX]]. | |||
==SMART attributes== | |||
{{ | |||
|0x01 = Read Error Rate | |0x01 = Read Error Rate | ||
|0x02 = Throughput Performance | |0x02 = Throughput Performance | ||
| Line 45: | Line 50: | ||
|0xF0 = Transfer Error Rate? | |0xF0 = Transfer Error Rate? | ||
}} | }} | ||
Revision as of 21:29, 13 February 2021
{{infobox hard drive |image1 = TOSHIBA HDWJ110.jpg |caption1 = Top-down view of hard drive. |image2 = Toshiba HDWJ110 SMART printout.png |caption2 = CrystalDiskInfo printout of SMART attributes. |manufacturer = Toshiba |family = Toshiba L200 |form_factor = 2.5" |z-height = 9.5 mm |speed = 5400 |capacity = 1 |capacity_unit = tb |interface = SATA |interface_version = SATA 2.6 (300 MB/s) |command_set = ATA8-ACS |platters = 2 |heads = 4 |recording_method = cmr |mttf = 600,000 hours |max_load_cycles = 600,000 |unrecoverable_error_rate = in
TOSHIBA HDWJ110 is a hard drive model created by Toshiba. It is notable for being one of the few remaining conventional magnetic recording 1 TB 2.5" drives remaining, the other being the WD10JFCX.
SMART attributes
{{ |0x01 = Read Error Rate |0x02 = Throughput Performance |0x03 = Spin-Up Time |0x04 = Start/Stop Count |0x05 = Reallocated Sectors Count |0x07 = Seek Error Rate |0x08 = Seek Time Performance |0x09 = Power-On Hours |0x0A = Spin Retry Count |0x0C = Power Cycle Count |0xBF = G-Sense Error Rate |0xC0 = Power-off Retract Count |0xC1 = Load/Unload Cycle Count |0xC2 = Temperature (Max/Min/Current) |0xC4 = Reallocation Event Count |0xC5 = Current Pending Sector Count |0xC6 = Uncorrectable Sector Count |0xC7 = UltraDMA CRC Error Count |0xDC = Disk Shift |0xDE = Loaded Hours |0xDF = Load/Unload Retry Count |0xE0 = Load Friction |0xE2 = Load 'In'-time |0xF0 = Transfer Error Rate? }}