Template:Western Digital SMART attributes: Difference between revisions
From Computing Classics Wiki
Add disable ramp |
Change to use Template:Yesno |
||
| Line 8: | Line 8: | ||
|0x0A = Spin Retry Count | |0x0A = Spin Retry Count | ||
|0x0B = Recalibration Retries | |0x0B = Recalibration Retries | ||
|0xB7 = {{ | |0xB7 = {{Yesno|{{{enable_hp|}}}|yes = SATA Downshift Error Count (only available on HP OEM models)}} | ||
|0xB8 = {{ | |0xB8 = {{Yesno|{{{enable_hp|}}}|yes = End-to-End Error (only available on HP OEM models)}} | ||
|0xBB = {{ | |0xBB = {{Yesno|{{{enable_hp|}}}|yes = Reported Uncorrectable Errors (only available on HP OEM models)}} | ||
|0xBC = {{ | |0xBC = {{Yesno|{{{enable_hp|}}}|yes = Command Timeout (only available on HP OEM models)}} | ||
|0xBE = {{ | |0xBE = {{Yesno|{{{enable_hp|}}}|yes = Airflow Temperature (only available on HP OEM models)}} | ||
|0xBF = {{ | |0xBF = {{Yesno|{{{enable_0xbf|}}}|yes = G-Sense Error Rate (only available on some OEM models)}} | ||
|0x0C = Power Cycle Count | |0x0C = Power Cycle Count | ||
|0xC0 = {{ | |0xC0 = {{Yesno|{{{disable_ramp|}}}|no = Power-off Retract Count}} | ||
|0xC1 = {{ | |0xC1 = {{Yesno|{{{disable_ramp|}}}|no = Load/Unload Cycle Count}} | ||
|0xC2 = Temperature {{ | |0xC2 = Temperature {{Yesno|{{{disable_0xc2_for_hp|}}}|yes = (not available on HP OEM models)}} | ||
|0xC4 = Reallocation Event Count | |0xC4 = Reallocation Event Count | ||
|0xC5 = Current Pending Sector Count | |0xC5 = Current Pending Sector Count | ||
| Line 23: | Line 23: | ||
|0xC7 = UltraDMA CRC Error Count | |0xC7 = UltraDMA CRC Error Count | ||
|0xC8 = Write Error Rate | |0xC8 = Write Error Rate | ||
|0xF0 = {{ | |0xF0 = {{Yesno|{{{enable_dell|}}}|yes = Head Flying Hours (only available on Dell OEM models)}} | ||
|0xF1 = {{ | |0xF1 = {{Yesno|{{{enable_dell|}}}|yes = Total Host Writes (only available on Dell OEM models)}} | ||
|0xF2 = {{ | |0xF2 = {{Yesno|{{{enable_dell|}}}|yes = Total Host Reads (only available on Dell OEM models)}} | ||
|0xFE = {{ | |0xFE = {{Yesno|{{{enable_0xfe|}}}|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal|}}}||(only available on Dell OEM models)}}}} | ||
}}<noinclude>{{Documentation}}</noinclude> | }}<noinclude>{{Documentation}}</noinclude> | ||
Revision as of 09:13, 9 December 2022
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0B/11 | Recalibration Retries |
| 0x0C/12 | Power Cycle Count |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xC8/200 | Write Error Rate |
Template documentation (for the above template, sometimes hidden or invisible)