ST3250310AS: Difference between revisions
From Computing Classics Wiki
Created page with "{{infobox hard drive |image1 = ST3250310AS top lid.jpg |caption1 = Top lid of a ST3250310AS hard drive. |image2 = ST3250310AS CDI SMART printout.png |caption2 = CrystalDiskInf..." |
Day 0 patch |
||
| Line 19: | Line 19: | ||
|gpl = Yes | |gpl = Yes | ||
|statistics = No | |statistics = No | ||
|scterc = Not supported | |scterc = Not supported | ||
|interface = SATA | |interface = SATA | ||
|interface_version = SATA 2.5 (300 MB/s) | |interface_version = SATA 2.5 (300 MB/s) | ||
| Line 37: | Line 37: | ||
|released = 2007 | |released = 2007 | ||
|discontinued = Unknown | |discontinued = Unknown | ||
|predecessor = [[ST3250820AS]] | |||
|successor = [[ST3250318AS]] | |||
}} | }} | ||
'''ST3250310AS''' was a hard drive model created by [[Seagate]]. It succeeds the previous [[ST3250820AS]] part of the same Barracuda 7200.10 family, reducing the number of platters from two to one using 250 GB platters. It is the first Seagate drive model to be based on the then new [[wikipedia:perpendicular magnetic recording|perpendicular magnetic recording]]. This model was succeeded by the [[ST3250318AS]], which further reduced the number of heads from two to one. It is the final 250 GB Seagate 3.5" model to not be based on the F3 architecture. | '''ST3250310AS''' was a hard drive model created by [[Seagate]]. It succeeds the previous [[ST3250820AS]] part of the same Barracuda 7200.10 family, reducing the number of platters from two to one using 250 GB platters. It is the first Seagate drive model to be based on the then new [[wikipedia:perpendicular magnetic recording|perpendicular magnetic recording]]. This model was succeeded by the [[ST3250318AS]], which further reduced the number of heads from two to one. It is the final 250 GB Seagate 3.5" model to not be based on the F3 architecture. | ||
Revision as of 12:44, 10 October 2022
ST3250310AS was a hard drive model created by Seagate. It succeeds the previous ST3250820AS part of the same Barracuda 7200.10 family, reducing the number of platters from two to one using 250 GB platters. It is the first Seagate drive model to be based on the then new perpendicular magnetic recording. This model was succeeded by the ST3250318AS, which further reduced the number of heads from two to one. It is the final 250 GB Seagate 3.5" model to not be based on the F3 architecture.
SMART attributes
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x08/8 | Seek Time Performance |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0C/12 | Power Cycle Count |
| 0xBB/187 | Reported Uncorrectable Errors |
| 0xBD/189 | High Fly Writes |
| 0xBE/190 | Airflow Temperature |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature (Max/Min/Current) |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xC8/200 | Write Error Rate |
| 0xCA/202 | Data Address Mark Error |
Trivia
- This hard drive is the final Seagate Barracuda 7200.10 model, and the only one to use 250 GB platters.
References
- ↑ "Specifications Maxtor, model STM3250310AS". all-specs.net.