TOSHIBA HDWL110: Difference between revisions
From Computing Classics Wiki
Rm paragraph break |
Modernise layout |
||
| Line 1: | Line 1: | ||
{{infobox hard drive | {{infobox hard drive | ||
|image1 = TOSHIBA HDWL110 case view.jpg | | image1 = TOSHIBA HDWL110 case view.jpg | ||
|caption1 = Top-down view of a HDWL110. | | caption1 = Top-down view of a HDWL110. | ||
|image2 = Toshiba HDWL110 CDI SMART printout.png | | image2 = Toshiba HDWL110 CDI SMART printout.png | ||
|caption2 = CrystalDiskInfo printout of SMART attributes. | | caption2 = CrystalDiskInfo printout of SMART attributes. | ||
|manufacturer = [[Toshiba]] | | manufacturer = [[Toshiba]] | ||
|family = [[Toshiba L200]]/[[Toshiba MQ04]] | | family = [[Toshiba L200]]/[[Toshiba MQ04]] | ||
|form_factor = 2.5" | | form_factor = 2.5" | ||
|z-height = 7 mm | | z-height = 7 mm | ||
|capacity = 1 | | capacity = 1 | ||
|capacity_unit = tb | | capacity_unit = tb | ||
|speed = 5,400 | | speed = 5,400 | ||
|cache = 128 | | cache = 128 | ||
|cache_unit = mb | | cache_unit = mb | ||
|interface = SATA | | af = 512e | ||
|interface_version = SATA 3.3 (600 MB/s) | | max_transfer = None specified | ||
|command_set = ACS-3 Revision 5 | | interface = SATA | ||
|platters = 1 | | interface_version = SATA 3.3 (600 MB/s) | ||
|heads = 2 | | command_set = ACS-3 Revision 5 | ||
|capacity_per_platter = 1 | | apm = Yes | ||
|capacity_per_platter_unit = tb | | ncq = Yes | ||
|recording_method = smr | | aam = No | ||
|mttf = 600,000 hours | | trim = No | ||
|max_load_cycles = 600,000 | | scterc = Read: Disabled<br>Write: Disabled | ||
|released = 2017 | | platters = 1 | ||
|unrecoverable_error_rate = <math>1</math> in <math>10^{14}</math>}} | | heads = 2 | ||
| capacity_per_platter = 1 | |||
| capacity_per_platter_unit = tb | |||
| recording_method = smr | |||
| mttf = 600,000 hours | |||
| max_load_cycles = 600,000 | |||
| released = 2017 | |||
| unrecoverable_error_rate = <math>1</math> in <math>10^{14}</math> | |||
}} | |||
'''TOSHIBA HDWL110''' is a hard drive model created by [[Toshiba]]. It is a 1 TB 2.5" SMR drive. | '''TOSHIBA HDWL110''' is a hard drive model created by [[Toshiba]]. It is a 1 TB 2.5" SMR drive. | ||
| Line 56: | Line 64: | ||
|0xF0 = Transfer Error Rate? | |0xF0 = Transfer Error Rate? | ||
}} | }} | ||
== External links == | |||
* [https://www.toshiba-storage.com/products/toshiba-internal-hard-drives-l200/ Product page] | |||
* [https://www.toshiba-storage.com/products/toshiba-internal-hard-drives-l200/?pdf Datasheet] | |||
Revision as of 01:29, 7 March 2021
TOSHIBA HDWL110 is a hard drive model created by Toshiba. It is a 1 TB 2.5" SMR drive.
Similar units from other manufacturers include the WDC WD10SPZX-xxZ10Tx and ST1000LM048.
SMART attributes
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x02/2 | Throughput Performance |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x08/8 | Seek Time Performance |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0C/12 | Power Cycle Count |
| 0xBF/191 | G-Sense Error Rate |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature (Max/Min/Current) |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xDC/220 | Disk Shift |
| 0xDE/222 | Loaded Hours |
| 0xDF/223 | Load/Unload Retry Count |
| 0xE0/224 | Load Friction |
| 0xE2/226 | Load 'In'-time |
| 0xF0/240 | Transfer Error Rate? |