TOSHIBA HDWD110: Difference between revisions
Some more fixes |
m Text replacement - "https://toshiba.semicon-storage.com/content/dam/toshiba-ss/asia-pacific/docs/product/storage/product-manual/cHDD-DT01ACAxxx-Product-Overview.pdf" to "https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/storage/product/internal-specialty/cHDD-DT01ACAxxx-Product-Overview.pdf" |
||
| (One intermediate revision by the same user not shown) | |||
| Line 30: | Line 30: | ||
|recording_method = cmr | |recording_method = cmr | ||
|max_load_cycles = 300,000 | |max_load_cycles = 300,000 | ||
|kcc = KCC-REM-TSD-DT01ACA100 | |||
|pcb = 0A90377 | |||
|unrecoverable_error_rate = <math>1</math> in <math>10^{14}</math> | |unrecoverable_error_rate = <math>1</math> in <math>10^{14}</math> | ||
|released = 2015 | |released = 2015 | ||
| Line 69: | Line 71: | ||
*[https://www.toshiba-storage.com/products/toshiba-internal-hard-drives-p300/ Product page] | *[https://www.toshiba-storage.com/products/toshiba-internal-hard-drives-p300/ Product page] | ||
*[https://www.toshiba-storage.com/products/toshiba-internal-hard-drives-p300/?pdf Datasheet] | *[https://www.toshiba-storage.com/products/toshiba-internal-hard-drives-p300/?pdf Datasheet] | ||
*[https://toshiba.semicon-storage.com/content/dam/toshiba-ss | *[https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/storage/product/internal-specialty/cHDD-DT01ACAxxx-Product-Overview.pdf DT01ACA100 datasheet] | ||
{{Toshiba 3.5" internal-specialty hard drive families}} | {{Toshiba 3.5" internal-specialty hard drive families}} | ||
[[Category:Toshiba hard drive models]] | [[Category:Toshiba hard drive models]] | ||
[[Category:Toshiba P300]] | [[Category:Toshiba P300]] | ||
Latest revision as of 07:58, 10 February 2022
TOSHIBA HDWD110 is a hard drive model created by Toshiba. It is a retail rebadged TOSHIBA DT01ACA100 with slightly modified firmware, which in turn based on the Hitachi HDS721010DLE630, with Toshiba labelling and drive revision numbering. It is part of the P300 family, designed for desktop computers.
Competing drives include the various incarnations of the WDC WD10EZEX, ST1000DM003 and ST1000DM010-2EP102/ST1000DM010-2DM162.
History[edit | edit source]
The HDWD110 was introduced, alongside other members of the family, the TOSHIBA HDWD105, TOSHIBA HDWD120 and TOSHIBA HDWD130, in 2015, along with Toshiba's other batch of retail-oriented families, such as the Toshiba X300. Despite being rebadges of Toshiba DT01ACA family models, they apparently introduce new features such as a dual-stage actuator (though not in this 1 TB model), which was previously reserved for high-capacity enterprise models.
In 2018, alongside a refresh of Toshiba's retail hard drive branding, the HDWD110 received a new top label, incorporating the P300's new official colour (red), and stating "PC P300".
SMART attributes[edit | edit source]
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x02/2 | Throughput Performance |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x08/8 | Seek Time Performance |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0C/12 | Power Cycle Count |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature (Max/Min/Current) |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
Trivia[edit | edit source]
- This hard drive model, like most Hitachi desktop drive firmware (dating back all the way to the IBM Deathstar family), has a bugged Power-off Retract Count counter; it always matches Load/Unload Cycle Count, even if the hard drive has always been powered down normally. It can sometimes exceed Power Cycle Count, which is also illogical. The SMR 1-platter variant based on the same HDA, TOSHIBA HDWD220, does not exhibit this issue due to it running native Toshiba firmware; the Power-off Retract Count increments independently from Load/Unload Cycle Count.