Template:Western Digital SMART attributes - Revision history

TheDragonFire123: Add two levels of Lenovo attributes, plus consistently use "OEM drives" not the misleading "OEM models"

2023-01-09T00:54:07Z

Add two levels of Lenovo attributes, plus consistently use "OEM drives" not the misleading "OEM models"

← Older revision		Revision as of 00:54, 9 January 2023
Line 8:		Line 8:
	\|0x0A = Spin Retry Count		\|0x0A = Spin Retry Count
	\|0x0B = Recalibration Retries		\|0x0B = Recalibration Retries
	~~\|0xB7 = {{Yesno\|{{{enable_hp\|}}}\|yes = SATA Downshift Error Count (only available on HP OEM models)}}~~
	~~\|0xB8 = {{Yesno\|{{{enable_hp\|}}}\|yes = End-to-End Error (only available on HP OEM models)}}~~
	~~\|0xBB = {{Yesno\|{{{enable_hp\|}}}\|yes = Reported Uncorrectable Errors (only available on HP OEM models)}}~~
	~~\|0xBC = {{Yesno\|{{{enable_hp\|}}}\|yes = Command Timeout (only available on HP OEM models)}}~~
	~~\|0xBE = {{Yesno\|{{{enable_hp\|}}}\|yes = Airflow Temperature (only available on HP OEM models)}}~~
	~~\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM models)}}~~
	\|0x0C = Power Cycle Count		\|0x0C = Power Cycle Count
			\|0xB7 = {{Yesno\|{{{enable_hp\|}}}\|yes = SATA Downshift Error Count (only available on HP OEM drives)}}
			\|0xB8 = {{Yesno\|{{{enable_hp\|}}}\|yes = End-to-End Error (only available on HP OEM drives)}}
			\|0xBB = {{Yesno\|{{{enable_hp\|}}}{{{enable_lenovo_new\|}}}\|yes = Reported Uncorrectable Errors (only available on {{Yesno\|{{{enable_hp\|}}}\|yes = HP}}{{#ifeq: {{Yesno\|{{{enable_hp\|}}}\|yes = Yes}}\|{{Yesno\|{{{enable_lenovo_new\|}}}\|yes = Yes}}\| or \|}}{{Yesno\|{{{enable_lenovo_new\|}}}\|yes = Lenovo}} OEM drives)}}
			\|0xBC = {{Yesno\|{{{enable_hp\|}}}\|yes = Command Timeout (only available on HP OEM drives)}}
			\|0xBE = {{Yesno\|{{{enable_hp\|}}}\|yes = Airflow Temperature (only available on HP OEM drives)}}
			\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM drives)}}
	\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Power-off Retract Count}}		\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Power-off Retract Count}}
	\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Load/Unload Cycle Count}}		\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Load/Unload Cycle Count}}
	\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM ~~models~~)}}		\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM drives)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count
	\|0xC5 = Current Pending Sector Count		\|0xC5 = Current Pending Sector Count
Line 23:		Line 23:
	\|0xC7 = UltraDMA CRC Error Count		\|0xC7 = UltraDMA CRC Error Count
	\|0xC8 = Write Error Rate		\|0xC8 = Write Error Rate
	\|0xF0 = {{Yesno\|{{{enable_dell\|}}}\|yes = Head Flying Hours (only available on Dell OEM ~~models~~)}}		\|0xCE = {{Yesno\|{{{enable_lenovo_new\|}}}\|yes = Flying Height (only available on Lenovo OEM drives)}}
	\|0xF1 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Writes (only available on Dell OEM ~~models~~)}}		\|0xF0 = {{Yesno\|{{{enable_dell\|}}}{{{enable_lenovo\|}}}\|yes = Head Flying Hours (only available on {{Yesno\|{{{enable_dell\|}}}\|yes = Dell}}{{#ifeq: {{Yesno\|{{{enable_dell\|}}}\|yes = Yes}}\|{{Yesno\|{{{enable_lenovo\|}}}\|yes = Yes}}\| or \|}}{{Yesno\|{{{enable_lenovo\|}}}\|yes = Lenovo}} OEM drives)}}
	\|0xF2 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Reads (only available on Dell OEM ~~models~~)}}		\|0xF1 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Writes (only available on Dell OEM drives)}}
	\|0xFE = {{Yesno\|{{{enable_0xfe\|}}}\|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM ~~models~~)}}}}		\|0xF2 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Reads (only available on Dell OEM drives)}}
			\|0xFE = {{Yesno\|{{{enable_0xfe\|}}}\|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM drives)}}}}
	}}<noinclude>{{Documentation}}</noinclude>		}}<noinclude>{{Documentation}}</noinclude>

TheDragonFire123: Fix "yes" showing up when ramp loading stats are disabled

2023-01-08T21:35:20Z

Fix "yes" showing up when ramp loading stats are disabled

← Older revision		Revision as of 21:35, 8 January 2023
Line 15:		Line 15:
	\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM models)}}		\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM models)}}
	\|0x0C = Power Cycle Count		\|0x0C = Power Cycle Count
	\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|no = Power-off Retract Count}}		\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Power-off Retract Count}}
	\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|no = Load/Unload Cycle Count}}		\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Load/Unload Cycle Count}}
	\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM models)}}		\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM models)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count

TheDragonFire123: Change to use Template:Yesno

2022-12-09T09:13:00Z

Change to use Template:Yesno

← Older revision		Revision as of 09:13, 9 December 2022
Line 8:		Line 8:
	\|0x0A = Spin Retry Count		\|0x0A = Spin Retry Count
	\|0x0B = Recalibration Retries		\|0x0B = Recalibration Retries
	\|0xB7 = {{~~#if:~~ {{{enable_hp\|}}}\|SATA Downshift Error Count (only available on HP OEM models)}}		\|0xB7 = {{Yesno\|{{{enable_hp\|}}}\|yes = SATA Downshift Error Count (only available on HP OEM models)}}
	\|0xB8 = {{~~#if:~~ {{{enable_hp\|}}}\|End-to-End Error (only available on HP OEM models)}}		\|0xB8 = {{Yesno\|{{{enable_hp\|}}}\|yes = End-to-End Error (only available on HP OEM models)}}
	\|0xBB = {{~~#if:~~ {{{enable_hp\|}}}\|Reported Uncorrectable Errors (only available on HP OEM models)}}		\|0xBB = {{Yesno\|{{{enable_hp\|}}}\|yes = Reported Uncorrectable Errors (only available on HP OEM models)}}
	\|0xBC = {{~~#if:~~ {{{enable_hp\|}}}\|Command Timeout (only available on HP OEM models)}}		\|0xBC = {{Yesno\|{{{enable_hp\|}}}\|yes = Command Timeout (only available on HP OEM models)}}
	\|0xBE = {{~~#if:~~ {{{enable_hp\|}}}\|Airflow Temperature (only available on HP OEM models)}}		\|0xBE = {{Yesno\|{{{enable_hp\|}}}\|yes = Airflow Temperature (only available on HP OEM models)}}
	\|0xBF = {{~~#if:~~ {{{enable_0xbf\|}}}\|G-Sense Error Rate (only available on some OEM models}}		\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM models)}}
	\|0x0C = Power Cycle Count		\|0x0C = Power Cycle Count
	\|0xC0 = {{~~#if:~~ {{{disable_ramp\|}}}\|\|Power-off Retract Count}}		\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|no = Power-off Retract Count}}
	\|0xC1 = {{~~#if:~~ {{{disable_ramp\|}}}\|\|Load/Unload Cycle Count}}		\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|no = Load/Unload Cycle Count}}
	\|0xC2 = Temperature {{~~#if:~~ {{{disable_0xc2_for_hp\|}}}\|(not available on HP OEM models)}}		\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM models)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count
	\|0xC5 = Current Pending Sector Count		\|0xC5 = Current Pending Sector Count
Line 23:		Line 23:
	\|0xC7 = UltraDMA CRC Error Count		\|0xC7 = UltraDMA CRC Error Count
	\|0xC8 = Write Error Rate		\|0xC8 = Write Error Rate
	\|0xF0 = {{~~#if:~~ {{{enable_dell\|}}}\|Head Flying Hours (only available on Dell OEM models)}}		\|0xF0 = {{Yesno\|{{{enable_dell\|}}}\|yes = Head Flying Hours (only available on Dell OEM models)}}
	\|0xF1 = {{~~#if:~~ {{{enable_dell\|}}}\|Total Host Writes (only available on Dell OEM models)}}		\|0xF1 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Writes (only available on Dell OEM models)}}
	\|0xF2 = {{~~#if:~~ {{{enable_dell\|}}}\|Total Host Reads (only available on Dell OEM models)}}		\|0xF2 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Reads (only available on Dell OEM models)}}
	\|0xFE = {{~~#if:~~ {{{enable_0xfe\|}}}\|Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM models)}}}}		\|0xFE = {{Yesno\|{{{enable_0xfe\|}}}\|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM models)}}}}
	}}<noinclude>{{Documentation}}</noinclude>		}}<noinclude>{{Documentation}}</noinclude>

TheDragonFire123: Add disable ramp

2022-09-07T12:38:27Z

Add disable ramp

← Older revision		Revision as of 12:38, 7 September 2022
Line 15:		Line 15:
	\|0xBF = {{#if: {{{enable_0xbf\|}}}\|G-Sense Error Rate (only available on some OEM models}}		\|0xBF = {{#if: {{{enable_0xbf\|}}}\|G-Sense Error Rate (only available on some OEM models}}
	\|0x0C = Power Cycle Count		\|0x0C = Power Cycle Count
	\|0xC0 = Power-off Retract Count		\|0xC0 = {{#if: {{{disable_ramp\|}}}\|\|Power-off Retract Count}}
	\|0xC1 = Load/Unload Cycle Count		\|0xC1 = {{#if: {{{disable_ramp\|}}}\|\|Load/Unload Cycle Count}}
	\|0xC2 = Temperature {{#if: {{{disable_0xc2_for_hp\|}}}\|(not available on HP OEM models)}}		\|0xC2 = Temperature {{#if: {{{disable_0xc2_for_hp\|}}}\|(not available on HP OEM models)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count

TheDragonFire123: Fix typo

2022-06-25T12:21:36Z

Fix typo

← Older revision		Revision as of 12:21, 25 June 2022
Line 26:		Line 26:
	\|0xF1 = {{#if: {{{enable_dell\|}}}\|Total Host Writes (only available on Dell OEM models)}}		\|0xF1 = {{#if: {{{enable_dell\|}}}\|Total Host Writes (only available on Dell OEM models)}}
	\|0xF2 = {{#if: {{{enable_dell\|}}}\|Total Host Reads (only available on Dell OEM models)}}		\|0xF2 = {{#if: {{{enable_dell\|}}}\|Total Host Reads (only available on Dell OEM models)}}
	\|0xFE = {{#if: {{{enable_0xfe\|}}}\|Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM models}}}}		\|0xFE = {{#if: {{{enable_0xfe\|}}}\|Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM models)}}}}
	}}<noinclude>{{Documentation}}</noinclude>		}}<noinclude>{{Documentation}}</noinclude>

TheDragonFire123 at 06:49, 21 June 2022

2022-06-21T06:49:11Z

← Older revision		Revision as of 06:49, 21 June 2022
Line 17:		Line 17:
	\|0xC0 = Power-off Retract Count		\|0xC0 = Power-off Retract Count
	\|0xC1 = Load/Unload Cycle Count		\|0xC1 = Load/Unload Cycle Count
	\|0xC2 = Temperature {{#if: {{{~~disble_0xc2_for_hp~~\|}}}\|(not available on HP OEM models)}}		\|0xC2 = Temperature {{#if: {{{disable_0xc2_for_hp\|}}}\|(not available on HP OEM models)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count
	\|0xC5 = Current Pending Sector Count		\|0xC5 = Current Pending Sector Count

TheDragonFire123 at 06:48, 21 June 2022

2022-06-21T06:48:38Z

← Older revision		Revision as of 06:48, 21 June 2022
Line 17:		Line 17:
	\|0xC0 = Power-off Retract Count		\|0xC0 = Power-off Retract Count
	\|0xC1 = Load/Unload Cycle Count		\|0xC1 = Load/Unload Cycle Count
	\|0xC2 = Temperature {{#if: {{{~~disble_0xce_for_hp~~\|}}}\|(not available on HP OEM models)}}		\|0xC2 = Temperature {{#if: {{{disble_0xc2_for_hp\|}}}\|(not available on HP OEM models)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count
	\|0xC5 = Current Pending Sector Count		\|0xC5 = Current Pending Sector Count

TheDragonFire123: Created page with "{{smartattr |0x01 = Read Error Rate |0x03 = Spin-Up Time |0x04 = Start/Stop Count |0x05 = Reallocated Sectors Count |0x07 = Seek Error Rate |0x09 = Power-On Hours |0x0A = Spin..."

2022-06-21T06:47:24Z

Created page with "{{smartattr |0x01 = Read Error Rate |0x03 = Spin-Up Time |0x04 = Start/Stop Count |0x05 = Reallocated Sectors Count |0x07 = Seek Error Rate |0x09 = Power-On Hours |0x0A = Spin..."

New page

{{smartattr
|0x01 = Read Error Rate
|0x03 = Spin-Up Time
|0x04 = Start/Stop Count
|0x05 = Reallocated Sectors Count
|0x07 = Seek Error Rate
|0x09 = Power-On Hours
|0x0A = Spin Retry Count
|0x0B = Recalibration Retries
|0xB7 = {{#if: {{{enable_hp|}}}|SATA Downshift Error Count (only available on HP OEM models)}}
|0xB8 = {{#if: {{{enable_hp|}}}|End-to-End Error (only available on HP OEM models)}}
|0xBB = {{#if: {{{enable_hp|}}}|Reported Uncorrectable Errors (only available on HP OEM models)}}
|0xBC = {{#if: {{{enable_hp|}}}|Command Timeout (only available on HP OEM models)}}
|0xBE = {{#if: {{{enable_hp|}}}|Airflow Temperature (only available on HP OEM models)}}
|0xBF = {{#if: {{{enable_0xbf|}}}|G-Sense Error Rate (only available on some OEM models}}
|0x0C = Power Cycle Count
|0xC0 = Power-off Retract Count
|0xC1 = Load/Unload Cycle Count
|0xC2 = Temperature {{#if: {{{disble_0xce_for_hp|}}}|(not available on HP OEM models)}}
|0xC4 = Reallocation Event Count
|0xC5 = Current Pending Sector Count
|0xC6 = Uncorrectable Sector Count
|0xC7 = UltraDMA CRC Error Count
|0xC8 = Write Error Rate
|0xF0 = {{#if: {{{enable_dell|}}}|Head Flying Hours (only available on Dell OEM models)}}
|0xF1 = {{#if: {{{enable_dell|}}}|Total Host Writes (only available on Dell OEM models)}}
|0xF2 = {{#if: {{{enable_dell|}}}|Total Host Reads (only available on Dell OEM models)}}
|0xFE = {{#if: {{{enable_0xfe|}}}|Free Fall Protection {{#if: {{{enable_0xfe_universal|}}}||(only available on Dell OEM models}}}}
}}<noinclude>{{Documentation}}</noinclude>

← Older revision		Revision as of 00:54, 9 January 2023
Line 8:		Line 8:
	\|0x0A = Spin Retry Count		\|0x0A = Spin Retry Count
	\|0x0B = Recalibration Retries		\|0x0B = Recalibration Retries
	~~\|0xB7 = {{Yesno\|{{{enable_hp\|}}}\|yes = SATA Downshift Error Count (only available on HP OEM models)}}~~
	~~\|0xB8 = {{Yesno\|{{{enable_hp\|}}}\|yes = End-to-End Error (only available on HP OEM models)}}~~
	~~\|0xBB = {{Yesno\|{{{enable_hp\|}}}\|yes = Reported Uncorrectable Errors (only available on HP OEM models)}}~~
	~~\|0xBC = {{Yesno\|{{{enable_hp\|}}}\|yes = Command Timeout (only available on HP OEM models)}}~~
	~~\|0xBE = {{Yesno\|{{{enable_hp\|}}}\|yes = Airflow Temperature (only available on HP OEM models)}}~~
	~~\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM models)}}~~
	\|0x0C = Power Cycle Count		\|0x0C = Power Cycle Count
			\|0xB7 = {{Yesno\|{{{enable_hp\|}}}\|yes = SATA Downshift Error Count (only available on HP OEM drives)}}
			\|0xB8 = {{Yesno\|{{{enable_hp\|}}}\|yes = End-to-End Error (only available on HP OEM drives)}}
			\|0xBB = {{Yesno\|{{{enable_hp\|}}}{{{enable_lenovo_new\|}}}\|yes = Reported Uncorrectable Errors (only available on {{Yesno\|{{{enable_hp\|}}}\|yes = HP}}{{#ifeq: {{Yesno\|{{{enable_hp\|}}}\|yes = Yes}}\|{{Yesno\|{{{enable_lenovo_new\|}}}\|yes = Yes}}\| or \|}}{{Yesno\|{{{enable_lenovo_new\|}}}\|yes = Lenovo}} OEM drives)}}
			\|0xBC = {{Yesno\|{{{enable_hp\|}}}\|yes = Command Timeout (only available on HP OEM drives)}}
			\|0xBE = {{Yesno\|{{{enable_hp\|}}}\|yes = Airflow Temperature (only available on HP OEM drives)}}
			\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM drives)}}
	\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Power-off Retract Count}}		\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Power-off Retract Count}}
	\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Load/Unload Cycle Count}}		\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|yes = \|no = Load/Unload Cycle Count}}
	\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM ~~models~~)}}		\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM drives)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count
	\|0xC5 = Current Pending Sector Count		\|0xC5 = Current Pending Sector Count
Line 23:		Line 23:
	\|0xC7 = UltraDMA CRC Error Count		\|0xC7 = UltraDMA CRC Error Count
	\|0xC8 = Write Error Rate		\|0xC8 = Write Error Rate
	\|0xF0 = {{Yesno\|{{{enable_dell\|}}}\|yes = Head Flying Hours (only available on Dell OEM ~~models~~)}}		\|0xCE = {{Yesno\|{{{enable_lenovo_new\|}}}\|yes = Flying Height (only available on Lenovo OEM drives)}}
	\|0xF1 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Writes (only available on Dell OEM ~~models~~)}}		\|0xF0 = {{Yesno\|{{{enable_dell\|}}}{{{enable_lenovo\|}}}\|yes = Head Flying Hours (only available on {{Yesno\|{{{enable_dell\|}}}\|yes = Dell}}{{#ifeq: {{Yesno\|{{{enable_dell\|}}}\|yes = Yes}}\|{{Yesno\|{{{enable_lenovo\|}}}\|yes = Yes}}\| or \|}}{{Yesno\|{{{enable_lenovo\|}}}\|yes = Lenovo}} OEM drives)}}
	\|0xF2 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Reads (only available on Dell OEM ~~models~~)}}		\|0xF1 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Writes (only available on Dell OEM drives)}}
	\|0xFE = {{Yesno\|{{{enable_0xfe\|}}}\|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM ~~models~~)}}}}		\|0xF2 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Reads (only available on Dell OEM drives)}}
			\|0xFE = {{Yesno\|{{{enable_0xfe\|}}}\|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM drives)}}}}
	}}<noinclude>{{Documentation}}</noinclude>		}}<noinclude>{{Documentation}}</noinclude>

← Older revision		Revision as of 09:13, 9 December 2022
Line 8:		Line 8:
	\|0x0A = Spin Retry Count		\|0x0A = Spin Retry Count
	\|0x0B = Recalibration Retries		\|0x0B = Recalibration Retries
	\|0xB7 = {{~~#if:~~ {{{enable_hp\|}}}\|SATA Downshift Error Count (only available on HP OEM models)}}		\|0xB7 = {{Yesno\|{{{enable_hp\|}}}\|yes = SATA Downshift Error Count (only available on HP OEM models)}}
	\|0xB8 = {{~~#if:~~ {{{enable_hp\|}}}\|End-to-End Error (only available on HP OEM models)}}		\|0xB8 = {{Yesno\|{{{enable_hp\|}}}\|yes = End-to-End Error (only available on HP OEM models)}}
	\|0xBB = {{~~#if:~~ {{{enable_hp\|}}}\|Reported Uncorrectable Errors (only available on HP OEM models)}}		\|0xBB = {{Yesno\|{{{enable_hp\|}}}\|yes = Reported Uncorrectable Errors (only available on HP OEM models)}}
	\|0xBC = {{~~#if:~~ {{{enable_hp\|}}}\|Command Timeout (only available on HP OEM models)}}		\|0xBC = {{Yesno\|{{{enable_hp\|}}}\|yes = Command Timeout (only available on HP OEM models)}}
	\|0xBE = {{~~#if:~~ {{{enable_hp\|}}}\|Airflow Temperature (only available on HP OEM models)}}		\|0xBE = {{Yesno\|{{{enable_hp\|}}}\|yes = Airflow Temperature (only available on HP OEM models)}}
	\|0xBF = {{~~#if:~~ {{{enable_0xbf\|}}}\|G-Sense Error Rate (only available on some OEM models}}		\|0xBF = {{Yesno\|{{{enable_0xbf\|}}}\|yes = G-Sense Error Rate (only available on some OEM models)}}
	\|0x0C = Power Cycle Count		\|0x0C = Power Cycle Count
	\|0xC0 = {{~~#if:~~ {{{disable_ramp\|}}}\|\|Power-off Retract Count}}		\|0xC0 = {{Yesno\|{{{disable_ramp\|}}}\|no = Power-off Retract Count}}
	\|0xC1 = {{~~#if:~~ {{{disable_ramp\|}}}\|\|Load/Unload Cycle Count}}		\|0xC1 = {{Yesno\|{{{disable_ramp\|}}}\|no = Load/Unload Cycle Count}}
	\|0xC2 = Temperature {{~~#if:~~ {{{disable_0xc2_for_hp\|}}}\|(not available on HP OEM models)}}		\|0xC2 = Temperature {{Yesno\|{{{disable_0xc2_for_hp\|}}}\|yes = (not available on HP OEM models)}}
	\|0xC4 = Reallocation Event Count		\|0xC4 = Reallocation Event Count
	\|0xC5 = Current Pending Sector Count		\|0xC5 = Current Pending Sector Count
Line 23:		Line 23:
	\|0xC7 = UltraDMA CRC Error Count		\|0xC7 = UltraDMA CRC Error Count
	\|0xC8 = Write Error Rate		\|0xC8 = Write Error Rate
	\|0xF0 = {{~~#if:~~ {{{enable_dell\|}}}\|Head Flying Hours (only available on Dell OEM models)}}		\|0xF0 = {{Yesno\|{{{enable_dell\|}}}\|yes = Head Flying Hours (only available on Dell OEM models)}}
	\|0xF1 = {{~~#if:~~ {{{enable_dell\|}}}\|Total Host Writes (only available on Dell OEM models)}}		\|0xF1 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Writes (only available on Dell OEM models)}}
	\|0xF2 = {{~~#if:~~ {{{enable_dell\|}}}\|Total Host Reads (only available on Dell OEM models)}}		\|0xF2 = {{Yesno\|{{{enable_dell\|}}}\|yes = Total Host Reads (only available on Dell OEM models)}}
	\|0xFE = {{~~#if:~~ {{{enable_0xfe\|}}}\|Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM models)}}}}		\|0xFE = {{Yesno\|{{{enable_0xfe\|}}}\|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal\|}}}\|\|(only available on Dell OEM models)}}}}
	}}<noinclude>{{Documentation}}</noinclude>		}}<noinclude>{{Documentation}}</noinclude>