TheDragonFire123: Fix AAM and APM support

2024-08-15T04:05:54Z

Fix AAM and APM support

← Older revision		Revision as of 04:05, 15 August 2024
Line 19:		Line 19:
	\|interface_version = SATA 1.0 (150 MB/s)		\|interface_version = SATA 1.0 (150 MB/s)
	\|command_set = ATA8-ACS version 3b		\|command_set = ATA8-ACS version 3b
	\|apm = ~~Yes~~		\|apm = No
	\|aam = No		\|aam = Yes
	\|ncq = No		\|ncq = No
	\|gpl = No		\|gpl = No

TheDragonFire123: Created page with "{{infobox hard drive |image1 = SAMSUNG SP1614C top lid.jpg |caption1 = Top lid of a SAMSUNG SP1614C. |image2 = SAMSUNG SP1614C CrystalDiskInfo SMART printout.png |caption2 = CrystalDiskInfo printout of SMART attributes from a SAMSUNG SP1614C. |manufacturer = Samsung |family = Samsung SpinPoint P80 |platform = Caesar? |form_factor = 3.5" |z-height = 26.1 |speed = 7,200 |capacity = 160 |capacity_unit = gb |cache = 8,192 |cache_unit = kib |af = No |max_transfer = 10..."

2024-02-05T04:26:33Z

Created page with "{{infobox hard drive |image1 = SAMSUNG SP1614C top lid.jpg |caption1 = Top lid of a SAMSUNG SP1614C. |image2 = SAMSUNG SP1614C CrystalDiskInfo SMART printout.png |caption2 = CrystalDiskInfo printout of SMART attributes from a SAMSUNG SP1614C. |manufacturer = Samsung |family = Samsung SpinPoint P80 |platform = Caesar? |form_factor = 3.5" |z-height = 26.1 |speed = 7,200 |capacity = 160 |capacity_unit = gb |cache = 8,192 |cache_unit = kib |af = No |max_transfer = 10..."

New page

{{infobox hard drive
|image1 = SAMSUNG SP1614C top lid.jpg
|caption1 = Top lid of a SAMSUNG SP1614C.
|image2 = SAMSUNG SP1614C CrystalDiskInfo SMART printout.png
|caption2 = CrystalDiskInfo printout of SMART attributes from a SAMSUNG SP1614C.
|manufacturer = [[Samsung]]
|family = [[Samsung SpinPoint P80]]
|platform = Caesar?
|form_factor = 3.5"
|z-height = 26.1
|speed = 7,200
|capacity = 160
|capacity_unit = gb
|cache = 8,192
|cache_unit = kib
|af = No
|max_transfer = 105 (840 Mb/s)
|interface = SATA
|interface_version = SATA 1.0 (150 MB/s)
|command_set = ATA8-ACS version 3b
|apm = Yes
|aam = No
|ncq = No
|gpl = No
|scterc = Not supported
|statistics = No
|platters = 2
|heads = 4
|capacity_per_platter = 80
|capacity_per_platter_unit = gb
|recording_method = cmr
|mttf = None
|max_load_cycles = N/A (contact start-stop)
|unrecoverable_error_rate = <math>1</math> in <math>10^{15}</math>
|kcc = E-H011-03-2476
|released = 2004?
|discontinued = Unknown
|predecessor = [[SAMSUNG SP1654N]]
|successor = [[SAMSUNG HD160JJ]]
}}
'''SAMSUNG SP1614C''' was a hard drive model created by [[Samsung]]. It was a 160 GB model based on two 80 GB platters, and was the first SATA 160 GB model. It mechanically is identical to the [[SAMSUNG SP1654N]], except it makes use of an onboard PATA to SATA bridge chip to provide the SATA interface. As a result, it cannot support NCQ and only has SATA-150 MB/s transfer rates. This model was succeeded by the [[SAMSUNG HD160JJ]], which uses a native SATA MCU that can support SATA-300 and NCQ.

==SMART attributes==
{{smartattr
|0x01 = Read Error Rate
|0x03 = Spin-Up Time
|0x04 = Start/Stop Count
|0x05 = Reallocated Sectors Count
|0x07 = Seek Error Rate
|0x08 = Seek Time Performance
|0x09 = Power-On Hours
|0x0A = Spin Retry Count
|0x0B = Recalibration Retries
|0x0C = Power Cycle Count
|0x0D = Soft Read Error Rate Stab
|0xBB = Reported Uncorrectable Errors
|0xBC = Command Timeout
|0xBE = Airflow Temperature
|0xC0 = Power-off Retract Count
|0xC1 = Load/Unload Cycle Count
|0xC2 = Temperature
|0xC4 = Reallocation Event Count
|0xC5 = Current Pending Sector Count
|0xC6 = Uncorrectable Sector Count
|0xC7 = UltraDMA CRC Error Count
|0xC8 = Write Error Rate
|0xC9 = Soft Read Error Rate
|0xCA = Data Address Mark Error
}}

==External links==
*[https://www.seagate.com/files/www-content/support-content/documentation/samsung/P80_ProductDataSheet_r1.7.pdf Datasheet]

[[Category:Samsung hard drive models]]

SAMSUNG SP1614C - Revision history

TheDragonFire123: Fix AAM and APM support